详细内容
白度 
 日期::2011/11/22  阅读次数:: 4139  来源::三锦仪器设备  
 
 

白度
白度用于评估白色和近白色样品。这些样品产生的数字和白度的目测等级相对应。
CIE Whiteness
CIE 白度
This is a whiteness index based on CIELab  L*, a*, b* values.  It provides relative evaluations of whiteness for samples that are very close in color and fluorescence.  The samples should all be measured with the same instrument, at nearly the same time.
该白度值是以CIELab  L*, a*, b*为基础建立的。它提供荧光色样的白度评价方法,评价时色样需在同一仪器和同时条件下测试。
The formula provides relative evaluations of whiteness.
白度的评价公式如下:

W = Y + 800 ( xn - x ) + 1700 ( yn - y )

W10  = Y10 + 800 ( xn,10 - x10 ) + 1700 ( yn,10 - y10 )

Tint Value:
Tint值:
Tw = 1000 ( xn - x ) - 650 ( yn - y )

Tw,10 = 900 ( xn,10 - x10 ) - 650 ( yn,10 - y10 )

Y is the Y tristimulus value of the sample;
Y 是色样的一个刺激值。
x and y are the x,y chromaticity coordinates of the sample;
x和y 是色样在色度坐标中的值。
xn  and yn    are the chromaticity coordinates of the perfect diffuser, all for the CIE 1931 standard observer.
xn和yn是CIE 1931,D65标准光源下的坐标值。


Y10 , x10 , y10 , xn,10 , and yn,10  are values for the CIE 1964 standard observer.
Y10 , x10 , y10 , xn,10 , and yn,10 是CIE 1964(10O视场)下的值。

The tint value (Tw and Tw,10) is a measure of the deviation from whiteness of the material toward the red or green direction. A positive value indicates a green tint and a negative value indicates a red tint.
Tint值(包括Tw 和Tw10)是白织物红绿色光上的偏向。
Tint>0,偏绿
Tint<0,偏红
Ganz 白度
Ganz 容差的公式是:
如果常数“C”不等于零,则
白度 = Y + Px + Qy +C
如果常数“C”等于零,则
白度 = Y + P(xn - x) + Q(yn - y)
该计算公式在 D65/2°和 D65/10°下有效。
默认值为:
P: 1868
Q: 3696
C: 813.69
ASTM E313-98 白度
ASTM E313-98 容差的公式是:
白度 = Y + (800) * (0.3101 - x) + (1700) * (0.3161 - y)
该计算公式的有效条件为 C/2°、C/10°、D50/2°、D50/10°、D65/2°和 D65/10°。
ASTM E313 白度
ASTM E313 容差的公式是:
白度 = 3.37472Z - 2.99Y
该计算公式只在 C/2°环境下有效。
蓝光白度(又称R457白度)
Wr=KrΣβ(λ)F(λ)△λ
式中:Kr=100/ΣF(λ)△λ;β(λ)为与标准白板的蓝光白度仪器相同照明观察条件下的光谱亮度因数。

 
 
『打印本文』 『关闭本页』
 
Copyright@2013-2023 杭州三锦仪器设备有限公司版权所有 备案号:浙ICP备13022655号-1
公司地址:杭州市萧山区通惠中路688号金鹭银座A幢10楼 联系电话:0571-82859932 82859935 传真:0571-82859930 免责申明

浙公网安备 33010902000871号